Item Category: Outdoor Sports

8mm 05T Open Loop Scooter Chain – 3 Feet with Master Link

Description Please note that you will need to cut or otherwise shorten the chain yourself, then use the included master link to re-attached the chain to your proper length. The chain may be open or already closed, but in either scenario, you will need to cut the chain to length. 3 feet of 8 mm 05T open loop scooter chain. Comes with a master link. This type of chain is most often used on 2-stroke gas scooters, higher power electric scooters, and pocket bikes. Compatible models are made by Motovox, X-Treme, and MotoTec just to name a few.

24 Volt Battery Pack for Razor MX350 Dirt Rocket Bike (7 Ah, Versions 9-32)

KEY FEATURESSet of Two – Most 24 volt electric dirt bikes require two 12 volt batteries as opposed to one 24 volt battery. The Razor MX350 is one of those bikes. Compatibility – This battery pack fits versions 9-32 of the Razor MX350.Wiring Harness – This battery pack comes with a wiring harness to make installation a breeze.Manufacturer Part Number – Razor part numbers: W15130640003 / W15130412003 / W15120040003Your model version can be determined through your Razor product ID, which is typically located on the battery cover or on the bottom of the frame on a barcode sticker. The 7th and 8th digits correspond to a version number (e.g. 01 = version 1, 02 = version 2, etc.). DESCRIPTIONIs your Razor scooter or bike running out of power too quickly? Then it sounds like you’re in need of some replacement parts. Specifically, you may want to take a look at our AlveyTech 24 volt battery pack for the Razor MX350 Dirt Rocket power e-bike. Most 24 volt electric dirt bikes require two 12 volt batteries as opposed to one 24 volt battery. The Razor MX350 is one of those bikes. These rechargeable deep cycle SLA batteries are made of the highest quality components and are completely sealed to prevent any potential acid leaks. They also have the same capacity of amp hours as the original batteries that came in your Razor MX350, so you don’t have to worry about any loss of performance or ride time! In addition, this battery pack comes with a wiring harness to make installation as easy as possible even if you’re new to the DIY world. So what are you waiting for? Add this high quality battery pack to your cart today! MODEL COMPATIBILITYRazor: MX350 Dirt Rocket (V9-32). SPECIFICATIONSType: AGMVoltage: 24V (12V each)Capacity: 7 AhLength: 5-7/8″Width: 2-3/4″Height: 3-3/4″Weight: 4.7 lbs.

CDI Module (Ignitor) for 50cc, 90cc, 110cc, 125cc, & 150cc Scooter – 6 Pin

Description:Capacitor discharge ignition (CDI module) or ignitor is used on very many gas scooters, ATVs, dirt bikes, and go karts with modern 4-stroke GY6/QMB139 or Honda-style engines. This ignitor is a commonly used scooter module in the motorsports industry. This style of connector CDI is used by Baja Motorsports, Roketa, Schwinn, Tank, TNG, Vento, X-Treme, and many more manufacturers and brands of scooters. This CDI module is commonly used on today’s popular medium to large engine sizes of 50cc, 125cc, and 150cc and has a 6-pin rounded connector as pictured. Also very common on 90cc and 110cc Chinese made ATVs & dirt bikes. This CDI scooter module is equipped with a «rev limiter», which limits the revolutions (RPMs or speed) of the engine. Note: 4-stroke and 2-stroke engines require different engine timing. Though they may appear visually similar, a CDI module from a 4-stroke engine cannot be interchanged with a CDI module from a 2-stroke engine. KYMCO Owners Please Note:This CDI module is an AC CDI and will not work on your scooter. Specification: Baja Motorsports part number: BR150-328 CDI Type: ACEngine Size: 50cc, 90cc, 125cc, 150ccEngine Type: 4-strokeLength: 6.5 cmWidth: 3.8 cmDepth: 2.2 cmNumber of Pins: 6Pin Configuration: 4 + 2Plug Shape: Rounded

24 Volt Battery Pack for Razor MX350 Dirt Rocket Bike (9 Ah, Versions 33+)

KEY FEATURESSet of Two – Most 24 volt electric dirt bikes require two 12 volt batteries as opposed to one 24 volt battery. The Razor MX350 is one of those bikes. Compatibility – This battery pack fits versions 33 and up of the Razor MX350.Wiring Harness – This battery pack comes with a wiring harness to make installation a breeze.Manufacturer Part Number – Razor part numbers: W15130640003 / W15130412003 / W15120040003Earlier Versions of the Razor MX350 (Versions 1-8) require a 10Ah battery.DESCRIPTIONAre you looking to get more ride time out of your Razor scooter or bike? Then it sounds like you’re in need of some replacement parts. Specifically, you may want to take a look at our AlveyTech 24 volt battery pack for the Razor MX350 Dirt Rocket power e-bike. Most 24 volt electric dirt bikes require two 12 volt batteries as opposed to one 24 volt battery. The Razor MX350 is one of those bikes. These rechargeable deep cycle SLA batteries are made of the highest quality components and are completely sealed to prevent any potential acid leaks. They also have a capacity of 9 amp hours as opposed to the meager 7 amp hour capacity of the original batteries that came in your Razor MX350. That means you’ll be able to ride your Razor for much longer between charges. In addition, this battery pack comes with a wiring harness to make installation as easy as possible even if you’re new to the DIY world. So what are you waiting for? Add this high quality battery pack to your cart today! MODEL COMPATIBILITYRazor: MX350 Dirt Rocket (V33+) SPECIFICATIONSStyle: AGMVoltage: 24 volts (12 volts each)Capacity: 9 AhLength: 5-7/8″Width: 2-1/2″Height: 3-3/4″Weight: 7 lbs.

24 Volt Battery Pack for Razor Dirt Quad (9 Ah, w/ Harness) – Replacement Power

KEY FEATURES SET OF TWO – Most 24 Volt quads require two 12 Volt batteries as opposed to one 24 Volt battery. The Razor Dirt Quad is one of those quads. WIDE COMPATIBILITY – This battery pack fits all Razor Dirt Quad ATV versions. However, it is not compatible with Razor Dirt Quad 500 ATV that comes with a 36-volt system.WIRING HARNESS – This battery pack comes with a wiring harness to make installation a breeze.MANUFACTURER PART NUMBER – Razor part numbers: W15130640003 / W15130412003DESCRIPTIONIs your Razor electric dirt quad, scooter, ATV, or bike running out of power too quickly? Then it sounds like you’re in need of some replacement parts. Specifically, you may want to take a look at our AlveyTech 24 Volt battery pack for the Razor Dirt Quad. These rechargeable deep cycle SLA batteries are made of the highest quality components and are completely sealed to prevent any potential acid leaks. They also have a capacity of 9 amp hours as opposed to the meager 7 amp hour capacity of the original batteries that came in your Razor, so not only will you be getting your go-kart back up and running, you’ll be giving it an upgrade as well! In addition, this battery pack comes with a wiring harness to make installation as easy as possible even if you’re new to the DIY world. Simply connect the wires as shown in the instructions, and you’re good to go! So what are you waiting for? Add this high quality battery pack to your cart today! MODEL COMPATIBILITYRazor: Dirt Quad (Not compatible with Dirt Quad 500) SPECIFICATIONSType: AGMVoltage: 24V (12V x2)Capacity: 9 AhLength: 5-7/8”Width: 2-3/4”Height: 3-3/4”Weight: 7 lbs.

85 mm Kickstand Spring for the Monster Moto MM-B80 Mini Bike – Chrome Universal

Key Features SPECS – Overall length is 3-1/2″ (85 mm) and coil length is 1-11/16″. WIDE COMPATIBILITY – Compatible with the Baja Doodle Bug, Motovox MBX10, Motovox MBX11, Monster Moto / Mega Moto Classic 1000w, and Monster Moto / Mega Moto MM-B80 mini bike. EASY TO REPLACE – Simple to install. Easy to use. No Tools needed for this DIY. AFFORDABLE – Buy two or more to keep as spares. SINGLE – This is for one spring. Product Description Does your kickstand carelessly flop around in the wind? Does your mini-bike no longer stay standing up? We have the perfect spring to keep your kickstand working properly or to replace that missing spring altogether. No more flopping around or your mini bike ending up in the dirt. You will be back to looking good on the trail in a jiffy. This direct replacement spring is compatible with the Baja Doodle Bug, Motovox MBX10, and the Motovox MBX11. This will also work for the Monster Moto / Mega Moto Classic 1000w, and Monster Moto / Mega Moto MM-B80 mini bike. The overall length of our kickstand spring is 3-1/2″ (85 mm) and the coil length is 1-11/16″. This spring will be easy to replace and simple to install. No tools will be needed. If additional assistance is needed, a piece of string wrapped around one end can help you pull the spring over the remaining post once the other side is installed on the frame. Add to Cart – With this spring being as affordable as it is, we would recommend adding a second, or even more, to your cart to keep as spares. MODEL COMPATIBILITY: Monster Moto / Mega Moto: Classic 80cc Mini Bike Monster Moto / Mega Moto: Classic 1000w Electric Mini Bike Motovox: MBX10; MBX11

Genuine Viro Rides Replacement Remote for Turn Style Electric Drift Board

Description: Genuine Viro Rides Replacement Remote for Turn Style Electric Drift Board Condition: New Other – No retail packaging. Shipping: Ships with USPS First Class Mail (may take longer near holidays or weekends). Items will only ship to your address on file after payment has been cleared. All international orders are handled exclusively through eBay’s Global Shipping Program.If you require an invoice/packing slip, please let us know at the time of purchase. **Please message us if you have any questions and we will respond as soon as we are able.** **We appreciate your business!!**

10″ x 4.50-5 PVC Plastic Tire Sleeve for Drift Trikes, Go-Kart, Drifting Scooter

The 10×4.50-5 PVC plastic tire sleeve for drift trikes will make your slick tires even slicker and slippier. Made from hard PVC, the replacement plastic sleeve was designed to limit the amount of rear tire traction and provide your ride with a faster drift effect. Coleman, MotoTec, Razor, and Huffy use the 10×4.50-5 slick tire on their dift trike models and they may be found on additional brands and models as well. Note: These hard PVC drift sleeves are made to fit tightly onto the tire. In order to mount easily, you should let some of the air out, then lubricate the tire with soap suds before pressing the sleeve onto the rubber. The pressing may be easier with a wood or rubber mallet. When the sleeve is in its correct position, just refill the tire with the correct air pressure. In addition, the PVC sleeve may adhere to the rubber tire better by using several strips of self-adhesive grip tape (such as used on skateboard decks) on the sleeve’s inner face. SpecificationsOuter diameter: 10-1/4″Inner diameter: 9-1/4″Width: 5-3/4″