40″ x 1″ Steel Axle Rod, 1″ to 3/4″ Step-Down & 3/4-16 Fine Thread for Go-Karts
Description:The 1″ axle rod for go-karts is a go-kart part common to many ‘karts and dune buggies. This steel axle features both ends stepped down to 3/4″ for the outer two inches. These stepped ends are machined with 3/4-16 fine thread to hold the retaining nuts and washers. There is also a 1/4″ keyway slot which extends the entire length of the axle. Key Features: High-Quality Steel – Crafted from durable steel, this 40″ x 1″ axle rod is built to last through even the toughest conditions. Perfect for trailers, go-karts, and moreKeyed Shaft – Our axle rod features a 1/4″ keyed shaft for easy and secure attachment. The keyed shaft runs up opposite sides of the axle to ensure you get a secure fitMeasurements – This axle features a 1″ to 3/4″ step-down for the last 2″ of the axle. At the end of each axle you will find a 3/4-16 fine thread with 2″ of length Wide Compatibility – The 1″ axle rod for go-karts is a go-kart part common to many ‘karts and dune buggies. This also fits a wide range of ATV, tow-behind trailer, and more
40″ x 1″ Steel Axle Rod, 1″ to 3/4″ Step-Down & 3/4-16 Fine Thread for Go-Karts
Description:The 1″ axle rod for go-karts is a go-kart part common to many ‘karts and dune buggies. This steel axle features both ends stepped down to 3/4″ for the outer two inches. These stepped ends are machined with 3/4-16 fine thread to hold the retaining nuts and washers. There is also a 1/4″ keyway slot which extends the entire length of the axle. Key Features: High-Quality Steel – Crafted from durable steel, this 40″ x 1″ axle rod is built to last through even the toughest conditions. Perfect for trailers, go-karts, and moreKeyed Shaft – Our axle rod features a 1/4″ keyed shaft for easy and secure attachment. The keyed shaft runs up opposite sides of the axle to ensure you get a secure fitMeasurements – This axle features a 1″ to 3/4″ step-down for the last 2″ of the axle. At the end of each axle you will find a 3/4-16 fine thread with 2″ of length Wide Compatibility – The 1″ axle rod for go-karts is a go-kart part common to many ‘karts and dune buggies. This also fits a wide range of ATV, tow-behind trailer, and more
3/4″-16 Secure Fastening Lock Nut for the 1″ Axle Shafts Go-Karts & Dune Buggies
Enhance the stability and safety of your off-road vehicle with the AlveyTech 3/4″-16 Lock Nut. This high-strength lock nut is built to deliver secure and reliable fastening. Made from premium materials, it withstands harsh conditions, including exposure to moisture, dirt, and intense vibration, ensuring long-lasting durability and consistent performance. Designed to fit 1″ stepped to 3/4″ axle shafts and used on many Go-karts and Dune Buggies, it ensures seamless integration with your vehicle’s components. This lock nut features a user-friendly design that allows for quick and easy setup on your vehicle’s axle shaft. Its precise threading ensures a hassle-free replacement for DIY enthusiasts. Durable Lock Nut: Made from high-quality materials, the AlveyTech lock nut is built to withstand harsh conditions, ensuring long-lasting durability and reliability. Secure Fastening: This 3/4″-16 lock nut is designed to provide a secure and reliable fastening solution, ensuring stability and safety for go-karts and dune buggies. Versatile Application: Ideal for go-karts, dune buggies, and other off-road vehicles, this lock nut delivers superior performance in demanding environments, even under intense vibration. Axle Shafts Fitment: Perfectly fit 1″ stepped to 3/4″ axle shafts, the AlveyTech lock nut ensures seamless integration with your vehicle’s existing components. Features: User-friendly design that allows for quick and easy setup Ideal for go-karts, dune buggies, and other off-road vehicles Comes with 3/4″-16 lock nut
3/4″-16 Secure Fastening Lock Nut for the 1″ Axle Shafts Go-Karts & Dune Buggies
Enhance the stability and safety of your off-road vehicle with the AlveyTech 3/4″-16 Lock Nut. This high-strength lock nut is built to deliver secure and reliable fastening. Made from premium materials, it withstands harsh conditions, including exposure to moisture, dirt, and intense vibration, ensuring long-lasting durability and consistent performance. Designed to fit 1″ stepped to 3/4″ axle shafts and used on many Go-karts and Dune Buggies, it ensures seamless integration with your vehicle’s components. This lock nut features a user-friendly design that allows for quick and easy setup on your vehicle’s axle shaft. Its precise threading ensures a hassle-free replacement for DIY enthusiasts. Durable Lock Nut: Made from high-quality materials, the AlveyTech lock nut is built to withstand harsh conditions, ensuring long-lasting durability and reliability. Secure Fastening: This 3/4″-16 lock nut is designed to provide a secure and reliable fastening solution, ensuring stability and safety for go-karts and dune buggies. Versatile Application: Ideal for go-karts, dune buggies, and other off-road vehicles, this lock nut delivers superior performance in demanding environments, even under intense vibration. Axle Shafts Fitment: Perfectly fit 1″ stepped to 3/4″ axle shafts, the AlveyTech lock nut ensures seamless integration with your vehicle’s existing components. Features: User-friendly design that allows for quick and easy setup Ideal for go-karts, dune buggies, and other off-road vehicles Comes with 3/4″-16 lock nut
36″ x 1″ Steel Axle Rod with 1″ to 3/4″ Step-Down & 3/4-16 Fine Threads
Are you looking for a replacement axle rod kit for your electric or gas ATV, go-kart, quad, or trailer? Luckily for you, we have all the parts and accessories you may need! Take a look at this AlveyTech 36”x1” axle rod with 1” to 3/4” step-down, 1/4” keyed slot, and 3/4-16 fine threaded end, which fits front and rear live hub wheel assembly. This axle rod is made of durable and high-quality steel alloy, meaning it can withstand almost anything you could possibly throw at it. It was also designed to be as universal and easy to install as possible thanks to the pre-cut 1/4″ keyway slot and 3/4-16 threaded ends. The 36” total length is also a very common size amongst ATVs, carts, go-karts, quads, and trailers. Not only are these axles high-quality, widely compatible, and easy to use and install, but they’re also very affordable! You can keep a few spares on hand just in case you end up with another project in the future! So, what are you waiting for you? Add one or more of our axles to your cart today! SPECIFICATIONS Axle length: 36″ Diameter: 1″ stepped down to 3/4″ on both ends Thread: 3/4-16 fine Axle key size: 1/4″
4″ x 4″ Go-Kart Live Axle Hub with 1″ to 3/4″ Step-Down for Gokart, Quad, ATV
Key Features SPECS – This is a 4″ x 4″ go-kart live axle hub with a 2-3/4″ hub length, 1″ axle diameter with a 3/4″ step-down, and uses a 1/4″ keyway slot. Includes a set of four lug nuts. SINGLE – Hubs sold individually. USE – Commonly used on gokarts, quads, ATVs, and trikes that use an 8″ wheel. MATERIAL – Made of tough durable steel. Product Description Has your old hub failed, or do you need a new hub to complete an old DIY project you have sitting around?One of our replacement steel hubs is what you can rely on to get you back up and rolling again.The 4″ x 4″ go-kart axle hub is most commonly found on go-karts using 8 inch rear or front wheels. Although these hubs are incompatible with Yerf-Dog ‘karts, these are compatible with many quad, ATV, cart, golf, and trike wheels that use this same hub. The hub assembly features a kit of four lug nuts, and the hubs are 2-3/4″ long. The inner bore is milled for a 1/4″ axle key.The most common style for gokarts features a 1″ inner (or inboard) shaft diameter with the axle turned down to a 3/4″ outer diameter.Please note that our AlveyTech 4″ x 4″ Go-Kart Live Axle Hubs with 1″ to 3/4″ Step-Down are sold as singles. To complete your project, you may need to buy more than one.Specs are going to be important when selecting a new hub. Please refer to our following specs to see if this will be the right hub for your project. Specifications Diameter: 5″ (125 mm) Length: 2-3/4″ Keyway & key size: 1/4″ (6.5 mm) Inboard axle bore diameter: 1″ Outboard axle bore diameter: 3/4″ Mounting lugs (across): 4″ Mounting lugs (side by side): 2-7/8″ Lug length: 1-1/16″ Lug thread: 1/2×20 On Jul 7, 2024 at 19:11:10 PDT, seller added the following information:
4″ x 4″ Go-Kart Live Axle Hub with 1″ to 3/4″ Step-Down for Gokart, Quad, ATV
Key Features SPECS – This is a 4″ x 4″ go-kart live axle hub with a 2-3/4″ hub length, 1″ axle diameter with a 3/4″ step-down, and uses a 1/4″ keyway slot. Includes a set of four lug nuts. SINGLE – Hubs sold individually. USE – Commonly used on gokarts, quads, ATVs, and trikes that use an 8″ wheel. MATERIAL – Made of tough durable steel. Product Description Has your old hub failed, or do you need a new hub to complete an old DIY project you have sitting around?One of our replacement steel hubs is what you can rely on to get you back up and rolling again.The 4″ x 4″ go-kart axle hub is most commonly found on go-karts using 8 inch rear or front wheels. Although these hubs are incompatible with Yerf-Dog ‘karts, these are compatible with many quad, ATV, cart, golf, and trike wheels that use this same hub. The hub assembly features a kit of four lug nuts, and the hubs are 2-3/4″ long. The inner bore is milled for a 1/4″ axle key.The most common style for gokarts features a 1″ inner (or inboard) shaft diameter with the axle turned down to a 3/4″ outer diameter.Please note that our AlveyTech 4″ x 4″ Go-Kart Live Axle Hubs with 1″ to 3/4″ Step-Down are sold as singles. To complete your project, you may need to buy more than one.Specs are going to be important when selecting a new hub. Please refer to our following specs to see if this will be the right hub for your project. Specifications Diameter: 5″ (125 mm) Length: 2-3/4″ Keyway & key size: 1/4″ (6.5 mm) Inboard axle bore diameter: 1″ Outboard axle bore diameter: 3/4″ Mounting lugs (across): 4″ Mounting lugs (side by side): 2-7/8″ Lug length: 1-1/16″ Lug thread: 1/2×20 On Jul 7, 2024 at 19:11:10 PDT, seller added the following information:
2*Go Kart Live Axle Hub 4″ x 4″ Wheel Hub For 1″ Shaft,with 1″ to 3/4″ Step Down
Key Features SPECS – This is a 4″ x 4″ go-kart live axle hub with a 2-3/4″ hub length, 1″ axle diameter with a 3/4″ step-down, and uses a 1/4″ keyway slot. Includes a set of four lug nuts. SINGLE – Hubs sold individually. USE – Commonly used on gokarts, quads, ATVs, and trikes that use an 8″ wheel. MATERIAL – Made of tough durable steel. Product Description Has your old hub failed, or do you need a new hub to complete an old DIY project you have sitting around?One of our replacement steel hubs is what you can rely on to get you back up and rolling again.The 4″ x 4″ go-kart axle hub is most commonly found on go-karts using 8 inch rear or front wheels. Although these hubs are incompatible with Yerf-Dog ‘karts, these are compatible with many quad, ATV, cart, golf, and trike wheels that use this same hub. The hub assembly features a kit of four lug nuts, and the hubs are 2-3/4″ long. The inner bore is milled for a 1/4″ axle key.The most common style for gokarts features a 1″ inner (or inboard) shaft diameter with the axle turned down to a 3/4″ outer diameter.Please note that our AlveyTech 4″ x 4″ Go-Kart Live Axle Hubs with 1″ to 3/4″ Step-Down are sold as singles. To complete your project, you may need to buy more than one.Specs are going to be important when selecting a new hub. Please refer to our following specs to see if this will be the right hub for your project. Specifications Diameter: 5″ (125 mm) Length: 2-3/4″ Keyway & key size: 1/4″ (6.5 mm) Inboard axle bore diameter: 1″ Outboard axle bore diameter: 3/4″ Mounting lugs (across): 4″ Mounting lugs (side by side): 2-7/8″ Lug length: 1-1/16″ Lug thread: 1/2×20 On Oct 28, 2024 at 20:37:06 PDT, seller added the following information:
2*Go Kart Live Axle Hub 4″ x 4″ Wheel Hub For 1″ Shaft,with 1″ to 3/4″ Step Down
Key Features SPECS – This is a 4″ x 4″ go-kart live axle hub with a 2-3/4″ hub length, 1″ axle diameter with a 3/4″ step-down, and uses a 1/4″ keyway slot. Includes a set of four lug nuts. SINGLE – Hubs sold individually. USE – Commonly used on gokarts, quads, ATVs, and trikes that use an 8″ wheel. MATERIAL – Made of tough durable steel. Product Description Has your old hub failed, or do you need a new hub to complete an old DIY project you have sitting around?One of our replacement steel hubs is what you can rely on to get you back up and rolling again.The 4″ x 4″ go-kart axle hub is most commonly found on go-karts using 8 inch rear or front wheels. Although these hubs are incompatible with Yerf-Dog ‘karts, these are compatible with many quad, ATV, cart, golf, and trike wheels that use this same hub. The hub assembly features a kit of four lug nuts, and the hubs are 2-3/4″ long. The inner bore is milled for a 1/4″ axle key.The most common style for gokarts features a 1″ inner (or inboard) shaft diameter with the axle turned down to a 3/4″ outer diameter.Please note that our AlveyTech 4″ x 4″ Go-Kart Live Axle Hubs with 1″ to 3/4″ Step-Down are sold as singles. To complete your project, you may need to buy more than one.Specs are going to be important when selecting a new hub. Please refer to our following specs to see if this will be the right hub for your project. Specifications Diameter: 5″ (125 mm) Length: 2-3/4″ Keyway & key size: 1/4″ (6.5 mm) Inboard axle bore diameter: 1″ Outboard axle bore diameter: 3/4″ Mounting lugs (across): 4″ Mounting lugs (side by side): 2-7/8″ Lug length: 1-1/16″ Lug thread: 1/2×20 On Oct 28, 2024 at 20:37:06 PDT, seller added the following information:
4-1/2″ Foot Peg with Spring & Clevis Pin for Dirt Bike, Mini Bikes, and Scooters
Enhance your riding experience with AlveyTech Foot Pegs. These versatile foot pegs can be used as either left-side or right-side footrests, offering flexibility and convenience. Crafted from durable alloy steel, these foot pegs are designed to withstand the demands of off-road riding, ensuring long-lasting performance and reliability even under challenging conditions. Each item includes one foot peg, along with the necessary spring and clevis pin, providing all the components needed for a complete assembly. Compatible with a variety of Dirt Bikes, Mini Bikes, and Scooters, these foot pegs offer perfect fitment, allowing riders to use them across different vehicles. This foot peg can be quickly and effortlessly installed or replaced, allowing riders to customize their ride and get back on the road. Sturdy Foot Pegs: Crafted from high-quality alloy steel, this foot peg is built to withstand the rigors of off-road riding, ensuring durability and reliability even under challenging conditions. Footrests Fitment: These 4-1/2″ long flip-up foot pegs offer versatile functionality, serving as either left-side or right-side footrests, providing flexibility and convenience for riders. Wide Compatibility: Compatible with a variety of dirt bikes, mini bikes, and scooters, these steel foot pegs offer precise a fit, allowing riders to use them across different vehicles. Features: Foot peg for dirt bikes, mini bikes & scooters replacement part Requiring minimal tools to install Sold as a single foot peg assembly