85 mm Kickstand Spring for the Monster Moto MM-B80 Mini Bike – Chrome Universal
Key Features SPECS – Overall length is 3-1/2″ (85 mm) and coil length is 1-11/16″. WIDE COMPATIBILITY – Compatible with the Baja Doodle Bug, Motovox MBX10, Motovox MBX11, Monster Moto / Mega Moto Classic 1000w, and Monster Moto / Mega Moto MM-B80 mini bike. EASY TO REPLACE – Simple to install. Easy to use. No Tools needed for this DIY. AFFORDABLE – Buy two or more to keep as spares. SINGLE – This is for one spring. Product Description Does your kickstand carelessly flop around in the wind? Does your mini-bike no longer stay standing up? We have the perfect spring to keep your kickstand working properly or to replace that missing spring altogether. No more flopping around or your mini bike ending up in the dirt. You will be back to looking good on the trail in a jiffy. This direct replacement spring is compatible with the Baja Doodle Bug, Motovox MBX10, and the Motovox MBX11. This will also work for the Monster Moto / Mega Moto Classic 1000w, and Monster Moto / Mega Moto MM-B80 mini bike. The overall length of our kickstand spring is 3-1/2″ (85 mm) and the coil length is 1-11/16″. This spring will be easy to replace and simple to install. No tools will be needed. If additional assistance is needed, a piece of string wrapped around one end can help you pull the spring over the remaining post once the other side is installed on the frame. Add to Cart – With this spring being as affordable as it is, we would recommend adding a second, or even more, to your cart to keep as spares. MODEL COMPATIBILITY: Monster Moto / Mega Moto: Classic 80cc Mini Bike Monster Moto / Mega Moto: Classic 1000w Electric Mini Bike Motovox: MBX10; MBX11
10″ x 4.50-5 PVC Plastic Tire Sleeve for Drift Trikes, Go-Kart, Drifting Scooter
The 10×4.50-5 PVC plastic tire sleeve for drift trikes will make your slick tires even slicker and slippier. Made from hard PVC, the replacement plastic sleeve was designed to limit the amount of rear tire traction and provide your ride with a faster drift effect. Coleman, MotoTec, Razor, and Huffy use the 10×4.50-5 slick tire on their dift trike models and they may be found on additional brands and models as well. Note: These hard PVC drift sleeves are made to fit tightly onto the tire. In order to mount easily, you should let some of the air out, then lubricate the tire with soap suds before pressing the sleeve onto the rubber. The pressing may be easier with a wood or rubber mallet. When the sleeve is in its correct position, just refill the tire with the correct air pressure. In addition, the PVC sleeve may adhere to the rubber tire better by using several strips of self-adhesive grip tape (such as used on skateboard decks) on the sleeve’s inner face. SpecificationsOuter diameter: 10-1/4″Inner diameter: 9-1/4″Width: 5-3/4″
10×4.50-5 Tubeless Slick Pneumatic Tire for Drift Trike and Go-Kart Parts (Qind)
Experience the ultimate in drifting performance with the AlveyTech 10×4.50-5 Tubeless Slick Tire, meticulously designed for the Drift Trike and Go-Karts. This pneumatic tire is crafted from durable black rubber, ensuring longevity and reliability even under the most demanding conditions. The innovative QD-101 treadless design of this tire offers reduced traction for higher velocity, allowing you to effortlessly glide across the surface with precision and control. Strategically placed indents on the tire provide enhanced grip on the drift sleeves, enhancing stability and maneuverability during exhilarating high-speed drifts and turns. With a maximum inflation pressure of 14 PSI, installation is quick and easy, making this tire the perfect choice for drift trike and go-kart enthusiasts. Tubeless Slick Tire: The AlveyTech 10×4.50-5 tubeless slick tire is designed for the Drift Trike and Go-Karts, ensuring high-speed, and optimal performance on the track. Durable Construction: Crafted with premium black rubber, this pneumatic tire is built to withstand the rigors of drift triking and racing, providing long-lasting durability and reliability. Treadless Design: Featuring a QD-101 treadless design, this heavy-duty tire provides reduced traction for higher velocity, allowing you to glide smoothly across the track with precision and control. Features: Replacement Parts for Drift Trikes and Go-Karts Made with premium rubber Compatible with: Coleman Powersports DT200 196cc Drift Trike
Freewheel Brake Assembly Lever Cap (Type 1)
Here is that little yellow freewheel brake assembly lever cap that you lost. We found it for you. Although made to fit the Pride Pursuit, Victory 9, Victory 10, and the Go-Go Elite Traveller, this handy little hunk of rubber will no doubt fit on many other Pride and Go-Go models’ brake levers as well. Check the Specifications tab for this little handle’s dimensions to see if it matches your requirements. It will substitute for the discontinued Freewheel Brake Assembly Lever Cap (Type 2). Monster Scooter Parts carries almost everything for scooters and power chairs imaginable, including this little yellow rubber freewheel brake lever cap for a Pride Pursuit, Go-Go Elite Traveller, and many others.
1-1/2″ Diameter Steel Shaft Collar with 1″ Bore & Set Screw (Set of 4)
Use this 1-1/2″ diameter steel shaft collar with a 1″ bore to position securely any wheel on a 1″ axle shaft. This means that you can use a longer axle to provide a wider wheel base or to use wider wheel assemblies on soft surfaces for a true «all-terrain» go-kart or ATV. Our shaft collars are made of strong weldable steel and are coated in zinc oxide for corrosion resistance. Sold as a set of 4.
1-1/2″ Diameter Steel Shaft Collar with 1″ Bore & Set Screw (Set of 4)
Use this 1-1/2″ diameter steel shaft collar with a 1″ bore to position securely any wheel on a 1″ axle shaft. This means that you can use a longer axle to provide a wider wheel base or to use wider wheel assemblies on soft surfaces for a true «all-terrain» go-kart or ATV. Our shaft collars are made of strong weldable steel and are coated in zinc oxide for corrosion resistance. Sold as a set of 4.
1/4″-20×1″ Black Pan Head Machine Screw
Here is a part so common, so anonymous, yet so ubiquitous that most people never think about it until they need it. The 1/4″-20×1″ long threaded black oxide pan screw is the most standard size holding your scooter or power chair’s armrest to the bracket. Found on literally hundreds of scooter and power chair brands and models, this humble little screw does so much, yet asks nothing in return but to be tightened down with the correct Phillips blade screwdriver.
Black Seat for the Motovox MBX10 Mini Bike
If you are in need of a black seat to bring that touch of comfort and style to your Motovox MBX10 Mini Bike, you need not look any further. This is the perfect replacement Motovox seat, so no second-guessing at if this will work on your MBX10. With a quick securing of a few screws, you can get back to tearing up the dirt track. SpecificationsLength: 19″Width: 7″
4.10-6 ATV & Mini Bike Tire
The 4.10-6 ATV and mini bike tire is a fine piece of rubber for a number of small recreational offroad models. This tire makes a great upgrade to your machine with a more aggressive tread pattern to provide superior grip on loose surfaces. The 4.10-6 tire is most commonly found on the front set of rims with a set of 13×5.00-6 tires on the rear. It is known to be compatible with models from FitRight, TaoTao, and X-PRO, as well as many others. If these tires are to be used together it is recommended they be replaced in pairs.
46″ Throttle Cables for the Monster Moto MM-B80 and Motovox MBX Mini Bike Parts
Enhance the throttle response of your mini bike with the AlveyTech High-Strength Throttle Cable. Crafted with high-quality materials, this throttle cable ensures long-lasting durability, providing a reliable connection between the throttle and engine components. Featuring straight and threaded ends, this cable is built to integrate with your mini bike’s throttle system, providing optimal performance. With a sleeve length of 46 inches, this mini bike throttle cable wire provides sufficient length for proper routing and operation without any excess slack or tension. This throttle cable is compatible with Monster Moto MM-B80 and Motovox MBX mini bikes, allowing quickly replace your old or worn-out cable. This throttle cable delivers responsive throttle control. Upgrade your riding experience and enjoy effortless acceleration with the AlveyTech throttle cable. High-Strength Cable: Crafted with high-strength materials, this throttle cable ensures long-lasting durability, providing a reliable connection between the throttle and engine components. Compatibility Fit: Compatible with Monster Moto MM-B80 and Motovox MBX mini bikes, this throttle cable offers versatile fitment and seamless integration with other mini bike models. Secure Connection: Degign for secure connectivity, the durable cable features straight and threaded ends, preventing slippage or disconnection during operation for enhancing safety and performance. Sleeve Length: With a sleeve length of 46 inches, this mini bike throttle cable wire provides sufficient length for proper routing and operation, ensuring smooth throttle response and control, without any excess slack or tension. Features: Parts for Monster Moto MM-B80 and Motovox MBX Mini Bikes Compatible with: Coleman Powersports RB100 105cc Monster Moto / Mega Moto Classic 80cc Mini Bike Monster Moto / Mega Moto Classic 105cc Mini Bike Motovox MBX10 Motovox MBX11 Oryxearth 105cc 4-Stroke Mini Bike TaoTao DB100 105cc