Item Tag: Solid Color

100pk Bohning X Vane 3″ Shield Cut Vanes Mix Two Solid Colors Your Choice

Ships FromFarmsteadOutdoorsBrand New!Bohning X Vane 3″ Shield Cut 100 pack SOLID COLORS MIX TWO SOLID COLORS YOUR CHOICE**IF YOU WANT TWO DIFFERENT COLORS, MAKE SURE TO LEAVE THE COLORS IN MESSAGE TO THE SELLER OR SEND US A MESSAGE THROUGH EBAY MESSENGER Bohnings most popular crossbow vane, the shield cut 3″ X Vane™ is equally well-suited for compound bowhunting, 3D, and indoor spots, and it is NASP approved. Its length and profile provide just the right amount of steerage for large diameter arrows. The 3″ (76.2mm) X Vane measures 0.5″ (12.7mm) in height and weighs an average of 10.0 grains (348 mg). Like all Bohning vanes, the base of the X Vane is pre-primed for optimal adhesion.Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

36pk Bohning 2.5″ Heat Vanes Solid Colors Mix Two Solid Colors Your Choice

Ships FromFarmsteadOutdoorsBrand New!Bohning Heat VanesHeat Vanes 2.5″ 36 pack HEAT VANES 36 PK 2.5 INCH SOLID COLOR MIX TWO SOLID COLORS YOUR CHOICE**IF YOU WANT TWO DIFFERENT COLORS, MAKE SURE TO LEAVE THE COLORS IN MESSAGE TO THE SELLER Quick Overview• Low profile hunting vane that is great for any broadhead and 3D archery• Lightweight vane made of stiffer material• 2.5” in length, 0.41″ in height• 6 grains in weight

36pk Bohning X3 Vane 2.25″ Shield Cut Vanes Mix Two Solid Colors Your Choice

Ships FromFarmsteadOutdoorsBrand New!Bohning X3 Vane 2.25″ Shield Cut 36 pack SOLID COLORS MIX TWO SOLID COLORS YOUR CHOICE**IF YOU WANT TWO DIFFERENT COLORS, MAKE SURE TO LEAVE THE COLORS IN MESSAGE TO THE SELLER The 2.25″ X3 Vane is made of ultra-stiff material for maximum arrow stabilization and quiet flight, with the same profile as the shield cut X Vane. Bohning recommends the 2.25″ X3 for 3D, indoor spots, Fita and Field. The 2.25″ (57.2mm) X3 Vane measures 0.33″ (8.4mm) in height and weighs an average of 5.8 grains (375.8 mg). Like all Bohning vanes, the base of the X3 Vane is pre-primed for optimal adhesion. Due to the ultra-stiff material, we recommend using an instant glue and/or a fletching jig with high adhesion force such as Bohning’s Tower Jig or Multi-Fletcher.

36pk Bohning 2″ Blazer Vanes Solid Colors Mix Two Solid Colors Your Choie

Ships FromFarmsteadOutdoorsBrand New!Bohning Blazer VanesBlazer Vanes 2″ 36 pack BLAZER VANES 36 PK 2 INCH SOLID COLOR MIX TWO SOLID COLORS YOUR CHOICE**IF YOU WANT TWO DIFFERENT COLORS, MAKE SURE TO LEAVE THE COLORS IN MESSAGE TO THE SELLER Blazer Vane This is the vane that has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the «Knock-Off», «Wanna-Be», «Copy-Cat» vanes combined! This is the vane that, hands down, out-performed them all! The Blazer® Vane, with its unique design, begins steering and correcting immediately. The combination of the steep leading edge angle and material stiffness enables the air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow created by the precise leading edge angle allows the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. *Logo addition in process – your tiger vane order may or may not contain the Blazer® logo. *Blazer ® Vanes are 1.987″ long, with a profile height of .568″ and weigh just 6 grains! They work great for crossbow arrows too!

36pk Bohning 2″ Blazer Tiger Vanes Mix Two Colors Your Choice

Ships FromFarmsteadOutdoorsBrand New!Bohning Tiger Blazer 36 pack TIGER COLORS MIX TWO COLORS OF YOUR CHOICE**IF YOU WANT TWO DIFFERENT COLORS, MAKE SURE TO LEAVE THE COLORS IN MESSAGE TO THE SELLER Bohning Blazer VaneThis is the vane that has dropped more jaws, hung more trophies, convinced more skeptics, and provided more big silly grins than all the «Knock-Off», «Wanna-Be», «Copy-Cat» vanes combined! This is the vane that, hands down, out-performed them all! The Blazer® Vane, with its unique design, begins steering and correcting immediately. The combination of the steep leading edge angle and material stiffness enables the air to flow over the vane in a manner that actually creates lift. This leaves the tip of each vane inside undisturbed air, similar to the drafting principle used in auto racing. This airflow created by the precise leading edge angle allows the tip of each vane to act like a rudder, which is noticeable at longer distances with the flatter trajectory Blazer® Vanes provide. *Logo addition in process – your tiger vane order may or may not contain the Blazer® logo. *Blazer ® Vanes are 1.987″ long, with a profile height of .568″ and weigh just 6 grains! They work great for crossbow arrows too!

36pk Bohning X Vane 3″ Shield Cut Vanes Mix Two Solid Colors Your Choice

Ships FromFarmsteadOutdoorsBrand New!Bohning X Vane 3″ Shield Cut 36 pack SOLID COLORS MIX TWO SOLID COLORS YOUR CHOICE**IF YOU WANT TWO DIFFERENT COLORS, MAKE SURE TO LEAVE THE COLORS IN MESSAGE TO THE SELLER Bohnings most popular crossbow vane, the shield cut 3″ X Vane™ is equally well-suited for compound bowhunting, 3D, and indoor spots, and it is NASP approved. Its length and profile provide just the right amount of steerage for large diameter arrows. The 3″ (76.2mm) X Vane measures 0.5″ (12.7mm) in height and weighs an average of 10.0 grains (348 mg). Like all Bohning vanes, the base of the X Vane is pre-primed for optimal adhesion.Proudly manufactured at the Bohning Factory in Lake City, Michigan, United States.

100pk Bohning X3 Vane 2.25″ Shield Cut Vanes Mix Two Solid Colors Your Choice

Ships FromFarmsteadOutdoorsBrand New!Bohning X3 Vane 2.25″ Shield Cut 100 pack SOLID COLORS MIX TWO SOLID COLORS YOUR CHOICE**IF YOU WANT TWO DIFFERENT COLORS, MAKE SURE TO LEAVE THE COLORS IN MESSAGE TO THE SELLER OR EBAY MESSENGER The 2.25″ X3 Vane is made of ultra-stiff material for maximum arrow stabilization and quiet flight, with the same profile as the shield cut X Vane. Bohning recommends the 2.25″ X3 for 3D, indoor spots, Fita and Field. The 2.25″ (57.2mm) X3 Vane measures 0.33″ (8.4mm) in height and weighs an average of 5.8 grains (375.8 mg). Like all Bohning vanes, the base of the X3 Vane is pre-primed for optimal adhesion. Due to the ultra-stiff material, we recommend using an instant glue and/or a fletching jig with high adhesion force such as Bohning’s Tower Jig or Multi-Fletcher.